Main Features :
-
4MP 3MP HD resolution, clear and fine images
-
Support 2D/3D noise reduction, digital wide dynamic
-
Advanced H.265 /H.264 video compression
-
Day and night, 36pcs Black IR Leds, 30M IR Distance
-
Super low rate, high definition quality of image
-
Professional anti-lightning, conform to GB/T17626.5 and IEC61000-4-5
-
Support cloud technology, onvif, easy to achieve network penetration, fro in line and alarm linkage
-
Provide web, CMS,Center platform management software Myeye, provide SDK development.
FAQ :
Q:What’s the default ip address of the camera ?
F: Wired Mode 192.168.1.10 Username : admin Password : null ( empty ) !
Wifi Mode 192.168.1.12 Username : admin Password : null ( empty ) !
Q: Does the camera support Motion Detect,FTP,Email alarm, RTSP and so on ?
F: Yes ! All the IP Cameras we are selling supports these functions .
1) Please Setup the motion detection in the CMS software .
2) We suggest the Sever-U and FileZilla FTP Server to upload the video or image.
3) For the Email alarm,please use Email server which supports SMTP ( Hotmail ,Yahoo not support SMTP ,it not supports Gmail temperately since the server problem ) .
4) ,RTSP URL for VLC media Player :
rtsp://$(IP):$(PORT)/user=$(USER)&password=$(PWD)&channel=$(Channel)&stream=$(Stream).sdp?real_stream
Example : rtsp://10.6.10.25:554/user=admin&password=&channel=1&stream=0.sdp?real_stream
Q: What’re the ports information of the cameras ?
F : ONVIF 2.0 Port 8899 ; RTSP Port 554 ; HTTP Port 80; Media Port 34567
Q:Does the camera support IE ,Chrome ,Firefox and so on ?
F: Since the plug-in problem ,for website interface IP address URL,ONLY IE supports Multi Language .
Chrome,Safari just support Chinese .
For cloud server XMEYE.NET ,it supports multi language
Q:When I finish the steps to add the camera to the CMS list,why it notify “ Can’t find
the Device “ even I can see the default ip address 192.168.1.10 in the menu .
F: It is the IP Address conflict ,the default ip address is not in the same network segment as your router.
Please click “Edit Device “ to change the camera’s ip address to make them in the same network segment !
For example ,if your router’s ip address is 192.168.0.1 ,then you need to change the camera’s ip address to 192.168.0.XX .